Mvci Driver For Toyota Windows 10

How to install Mini MVCI drivers.I ordered a cable from a Chinese supplier and I couldn't find any 'functional' tutorials on how to properly install on 64 bi. Enter Repair Name, Code and Phone all with number “1” and press OK If techstream asks for an activation/registration key, press Cancel to exit Go to Setup-VIM Selection-Select interface as MVCI Autokent-X64 1. 8 (6) and Iowa Administrative Code, 641-7. 127 version now,it can support WIFI,and VXDIAG software can works on WIN 7,WIN 8,WIN 10.

mvci driver for toyota.rar [Full version]

Direct download

(12/2017) Free download TOYOTA TIS Techstream V12.30.017 software and install on Windows 7 or Windows 10, to get it work with Techstream cables like Mini vci j2534 cable, Vxdiag vcx nano for toyota diagnostic tool, etc. Open the Device Manager the device should be loaded. If not, right click each failing device, select Install Driver, then ”Browse my Computer” and locate to “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS” (enable the ”include subfolders” flag). Click ”Next” and wait until drivers are installed.

MVCI Driver for TOYOTA-CABLE 2.0.1.msi

From 4shared.com 5.68 MB

Our goal is to provide high-quality video, TV streams, music, software, documents or any other shared files for free!

Registered users can also use our File Leecher to download files directly from all file hosts where it was found on. Just paste the urls you'll find below and we'll download file for you!

If you have any other trouble downloading mvci driver for toyota post it in comments and our support team or a community member will help you!

Here, obd365 offers MVCI Driver 1.4.8 for all users with original MVCI Toyota, Honda and Volvo 3-in-1 interface .

Free download mvci driver 1.4.8

Content included:

Compatibe device:

Original MVCI 3 in 1 for TOYOTA, HONDA, VOLVO

Here are 3 types of MVCI in our obdii365.com

Mvci Driver For Toyota Direct Download

Mvci Driver For Toyota Tis Download

MVCI for Toyota/Volvo/Honda 3 IN 1:

1. Software Version: V10.10.018

2. It is a high performance factory diagnostics for TOYOTA TIS

3. Compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.

4. Can works on Honda, Toyota, Lexus and Volvo.

5. Support Multi Languages:
Thai/ Turkish/ Vietnamese/ chinese /chinese(taiwan)/ Spanish/ French/ Indonesian/ Portuguese.

6. Operating system Windows XP

Mvci Driver For Toyota Tis X64 Download Windows 10

Original PCB borad:

Customer experience:

Mvci Driver For Toyota X64 Download

‘I bought the MVCI cable from China for $89. This is the same software and a similar interface that the dealerships are using to diagnose, upgrade, reset, etc our Rav4s.

Xhorse Electronics Mvci Driver For Toyota Tis Download

I can confirm this system works! I turned off my daytime running lights and removed the seat belt reminder. I also Reset my transmission adapted memory after a transmission rebuilt, watched live streaming data, such as transmission temperature. Wow, where has this been since 2007 when I got my Rav4.’

Mvci Driver For Toyota-cable 2.0.1 Download

Techstream definitely works with the Microsoft Windows 10 (x64) operating system. Here are easy directions for newbies to install/setup Techstream on Windows 10 64 bit for VXDIAG VCX NANO Toyota.

Questions and answers… here you go.

Q: I am trying to download a version of Techstream to my Windows 10, 64 bit computer, so I may use my new VCX Nano to diagnose my car issue- won’t start after 6 weeks sitting dormant.

A: Techstream has been compatible with 64 bit OSes for a while, so I don’t think that is your problem.

However, the driver for VxDaig Nano (which is what I think you meant) is not a 64 bit driver, so you will need to go back the sellers of VxDaig and seek their support to load it on a 64-bit system.

The other option, find a cheap laptop on eBay or CL with Win 7 and follow the VxDaig Nano instructions and it will load right up.

Q: What version of Techstream is compatible with the 2nd gen? Will v12 work?

A: I had 12.xx.024 for a bit but it was minus several menus needed for better diagnostics:(.

The guy I share the Prolong setup with used the version 12 software on his 2007, so it’ll work on a Gen2 ;).

Reloaded 10.30.029 and it works well(y).

Q: Can you post the instructions or a good link for installation on win 10?

A: This link describes the installation process, possibly with link to the software.
http://blog.obdexpress.co.uk/2017/01/24/install-mini-vci-with-techstream-v10-on-64bit-computer/

I think the first requirement is that your mini VCI cable hardware is capable of 32 and 64 bit, I think some of the earlier cables may be 32-bit (XP) only. If capable of 64-bit, then they give you a small CD with some special files “XHorse” and it takes a little bravery to mess with your Registry etc.

Btw, Many people will not be able to follow the instructions to install the necessary cominents. No judgement here, it is just reality.

Which is why I up telling people to stick with using an XP laptop instead.

That would be great if you have an XP laptop (or desktop) available…it is definitely a much easier install. But going forward I presume that’ll be harder to find. I thought the Win10 instructions were a little confusing but I worked thru it.

Q: How to install Techstream v10 on Windows 64 bit?

A: Quick note on techstream 10.x with windows 7 or greater x64 with the 1.4.1 (and possibly the 2.0.1) Mini VCI cable. I was having absolute fits trying to get the driver recognized. Turns out the cable was being recognized as a Broadcom Bluetooth 3.0 Chip. If you select that device, Select Update driver, Select Let me Pick From a list of device drivers on my computer (letting windows scan a specific location doesnt work), then click have disk and browse to the location of your MCVI drivers (Should be C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS) and go to the ftdibus directory and select the ftdibus.inf file. This will get the correct drivers in place for the bus. The COM drivers will install automatically after you get the bus driver in place.

Hopefully the search engines pick this up and it is helpful for someone else.

Q: Tips needed for Windows 10.

A: anyone wanting to try this, use a laptop of computer (or virtual machine) that you have zero personal information on and you do not banking or commerce with.

#1 top attack vector (phishing, malware, spyware…etc) is from these kinds of unauthorized downloads.

Techstream is a paid-for item from Toyota. any pirated copies, wow rolling the dice there….

go ahead and use it but on a laptop that is disposable and you do zero personal or private work with

source: this is what I do for a living (everything and anything in the CISSP)

Q: Does anyone have answers and easy directions for computer dummies?

A: TIS Techstream V10 Setup Instruction ( !!! for 64 bit system !!! ) :

copy “Program Files (x86) “folder to drive C: , tick “replace all current items “

plug the Mini VCI cable into USB

Open the Device Manager and locate two failing devices in the list. Both will appear with yellow icon (usually under “Other”), indicating that Windows failed to install drivers for them. Now, right click each failing device, select Install Driver, then “Browse my Computer”and locate to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”(enable the “include subfolders”flag). Click “Next”and wait until drivers are installed.

You should now see two new devices: “Universal Serial Bus ControllersUSB Serial Converte”and “Ports (COM & LPT)USB Serial Port (COMx)”.

Run the FirmwareUpdateTool.exe from the “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”. Click “Device Info”, You should see the “Device connected”screen.

Now install Techstream software using “Techstream_Setup_V10.10.018.exe” on our software CD

Software Registration: copy the two *.ini files in “Registration”folder to “C:Program Files (x86)Toyota DiagnosticsTechstreamEnv

* Attention: It’s C:Program Files (x86) not C:Program Files , BIG DIFFERENCE !!!

Registry Hack: Run the mvci-64bit.reg file to modify the registry for Techstream to recognize MINI-VCI under Windows x64

Run Techstream software. Go to Setup | VIM Select menu and select the “XHorse – MVCI”

Connect Mini VCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle”in Techstream. Wait. Then wait again. If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.

* Important Note:

DO NOT change the “User Type”when you will run your TIS Techstream for 1st time! LEAVE IT with the Default option! “Official”Dealer/Repairer with other words…
in [ VIM Select ] option, please select the [ Xhorse – MVCI ], not [ TIS Techstream VIM ]
If you get the following reminder while using the program:

—————————————————————-